Flexographic Printing.

Flexographic Printing Explained: How It Works on Almost Any Material

Flexographic Printing - How does it work?

Look around any supermarket shelf and you'll see flexographic printing everywhere: crisp packets, cereal boxes, drinks labels, carrier bags, shipping cartons. It's one of the most widely used print processes in the world. The reason is simple: it prints quickly, consistently and economically on a far wider range of materials than most other methods.

Flexographic printing, usually shortened to flexo, is a relief printing process. The image to be printed stands up from the surface of a flexible printing plate, much like a rubber stamp. Ink is applied to the raised areas, and the plate transfers it directly onto the material being printed.

Modern flexo plates are made from photopolymer, a light-sensitive material that hardens where it's exposed. The artwork is imaged onto the plate, the unexposed areas are washed or melted away, and what's left is a precise, durable relief of the design. Because the plate is flexible, it wraps around a cylinder and can follow the surface of uneven or textured materials, which is a big part of flexo's versatility.

Flexography's biggest strength is the range of surfaces it can print on. Three things make that possible.

Light, flexible contact.

The soft plate needs only a "kiss" of pressure to transfer ink. That means it can print on materials that would be crushed, stretched or marked by heavier processes: thin plastic films, delicate tissue, and the fluted surface of corrugated board.

A wide choice of inks

Flexo uses fast-drying, low-viscosity inks, and the ink can be matched to the material:

  • Water-based inks for absorbent materials such as paper and board.
  • Solvent-based inks for non-absorbent surfaces such as plastic films and foils, where the ink needs to bond to the surface rather than soak in.
  • UV-curable inks that harden instantly under ultraviolet light, giving tough, vivid results on films, labels and specialist materials.

Surface preparation.

Plastics such as polyethylene and polypropylene naturally resist ink. Before printing, they're often given a corona treatment, a controlled electrical discharge that raises the surface energy so the ink grips firmly.

Together, these mean flexo can print on:

  • Paper and card
  • Corrugated board for boxes and displays
  • Plastic films (PE, PP, PET) for bags, wraps and pouches
  • Self-adhesive label stock
  • Metallic foils and laminates
  • Non-woven fabrics

Talk to us about your project

Not sure whether flexographic printing is right for your job? Get in touch and we'll recommend the most cost-effective process for your material, quantities and finish.

Related Post

0 Comments

Submit a Comment

Solving Common Cross Plat easy way.